Memory Programming - Icom IC-T3H Instruction Manual

D Memory/call ➾ call/memory
q
Select the memory (call) channel to be transferred:
Push [C• ] ([ B•
MR
Push [Y]/[Z] to select the memory channel.
• When [VOL] is assigned as "dial," rotate [VOL] to select the mem-
ory channel. (p. 50)
w
Push [A•
FUNC
• "--" and " X " flashes.
e
Push [Y]/[Z] to select the target memory.
• When "dial" is assigned [VOL], rotate [VOL] to select the memory
channel. (p. 50)
r
Push [A•
FUNC
• Memory mode is selected and the contents are transferred to
the target memory.
D Clearing a memory
q
Push [A•
FUNC
mode.
• " X " and a memory channel number flash.
w
Push [Y]/[Z] to select the memory channel to be cleared.
• When [VOL] is assigned as "dial," rotate [VOL] to select the mem-
ory channel. (p. 50)
• The call channel cannot be cleared.
e
Push [A•
FUNC
r Push [A•
FUNC
• Perform step e and r operations within 1.5 sec, otherwise the
memory clearing is cancelled and the transceiver returns to the
memory mode.
• The contents of the selected memory are cleared.
t
Push [D•
CLR
]) to select the memory (call) mode.
CALL
], then push [C•
], then push [C•
], then push [C•
], then push [C•
], then push [C•
] to return to regular operation.

MEMORY PROGRAMMING

] momentarily.
MR
] for 1 sec.
MR
] to enter the memory transfer
MR
] momentarily.
MR
] for 1 sec.
MR
6
26