Memory (Skip) Scan - Icom IC-T3H Instruction Manual

8
SCAN OPERATION
I Memory (skip) scan
Memory scan repeatedly scans all programmed memory chan-
nels, except those set as skip channels.
q Push [C•
• " X " appears.
w Push [A•
• To change the scan direction, push [Y] or [Z].
• When "dial" is assigned [VOL], rotate [VOL] to change the scan di-
rection. (p. 50)
e Push [D•
D Setting skip channels
In order to speed up the scan interval, you can set memory
channels you don't wish to scan as skip channels.
q Push [C•
• " X " appears.
w Select a memory channel to set as a skip channel.
e Push [A•
and OFF.
• "SKIP" appears when the channel is set as a skip channel.
31
] to select memory mode, if necessary.
MR
], then push [5•
FUNC
] to stop the scan.
CLR
] to select memory mode, if necessary.
MR
], then push [6•
FUNC
] to start the scan.
SCAN
] to toggle the skip setting ON
SKIP