Dtmf Memory; Programming A Dtmf Code - Icom IC-T3H Instruction Manual

7
I Programming a DTMF code
The transceiver has 5 DTMF memory channels (d0 to d4) for stor-
age of often-used DTMF codes of up to 24 digits.
q
Push [A•
enter the DTMF memory.
• One of "d0" to "d4" appears.
w
Rotate [VOL] to select the desired channel.
e
Push [A•
1 sec. to enter the DTMF programming
mode.
• "_ _ _ _ _" appears.
• Programmed memories can be cleared in this way.
r
Push the digit keys, [A•
] and [#•
TION
• A maximum of 24 digits can be input.
• [✱•
OPTION
• If a digit is mistakenly input, push [SQL] or [PTT] momentarily then
repeat from step
t
Push [SQL] or [PTT] to input the digits and exit the DTMF pro-
gramming mode.
• Programmed DTMF codes sound when [SQL] is pushed to exit.
27

DTMF MEMORY

], then push [0•
FUNC
], then push [0•
FUNC
] to enter the desired DTMF code.
ENT
] enters as "E", [#•
q
.
-
DTMF M
- ] for
DTMF M
], [B• ], [C•
FUNC CALL
] enters as "F."
ENT
] to
], [D•
MR CLR
], [✱• -
OP