Kodak SR series User Manual page 9

Motion corder analyzer
Table of Contents

Advertisement

Precautions
FEDERAL COMMUNICATIONS COMMISSION STATEMENTS
WARNING: This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instruction manual,
may cause interference to radio communications. It has been tested and found to
comply with the limits for a Class "A" computing device pursuant to Subpart B
of Part 15 of the FCC Rules and VDE 0871 Class "B", which are designed to
provide reasonable protection against such interference when operated in a
commercial environment. Operation of this equipment in a residential area is
likely to cause interference in which case the user at his own expense will be
required to take whatever measures may be required to correct the interference.
This device complies with Part 15 of the FCC Rules and VDE 0871. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received including
interference that may cause undesired operation.
WARNING
This product is grounded through the power cord. This protective ground con-
nection is essential for safe operation of the equipment. Avoid electrical shock
by plugging the power cord into a properly wired receptacle. A loss of the pro-
tective ground, for any reason, could result in electrical shock. Use the proper
power cord and insure that it is in good condition.
CAUTION
To avoid the risk of fire, use the fuse specified for the equipment. The proper
fuse is listed on the back panel of the equipment. To avoid the risk of an explo-
sion, do not operate this product in an explosive atmosphere.
1.5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents