Processor Rear Panel - Kodak SR series User Manual

Processor Rear Panel

CONTROLS
REC READY
Press this button to place the Motion Corder in a ready to record state. Press the
TRIGGER button next to make a recording, or to return to Live mode press the
REC READY button a second time.
TRIGGER
To start a recording first press the REC READY button and then press the
TRIGGER button.
MODE
The MODE button toggles the Motion Corder between Live and Playback
modes.
This button toggles the playback direction. Press the button once to change from
forward to reverse play, press the button again to return to play forward.
STOP/ESC
This button serves a dual purpose, if you are playing back a recording press this
button to stop playback. If you are changing Motion Corder parameters using the
menu system, press the STOP button to exit from a menu to Live.
These buttons decrease the shutter speed in Live mode, decrease the play frame
rate, or move you down through the menu selections. These buttons also move
the Y reticle down and the X reticle to the left.
MENU/ENTER
Press this button to open a menu. If you are in Live mode, the menu that appears
deals with the various record parameters. If you are playing back a recording, the
menu deals with playback and display parameters. Use the arrow keys on either
side of the menu button to move through the menu and then press the menu
button to select an option.
These buttons increase the shutter speed in Live mode, increase the play frame
rate, or move you up through the menu selections. These buttons also move the
Y reticle up and the X reticle to the right.
2.4
REC
MODE
TRIGGER
READY
STOP
MENU
ESC ENTER