Kodak SR series User Manual page 48

Specifications
KODAK Motion Corder Analyzer, SR series
Recording Technique:
Recording Modes: START
Record Rates at Maximum Output Resolution:
Frames/Sec
Resolution: H
in Pixe ls: V
SR-Ultra
SR-1000
SR-500
Frame Storage:
Playback Rates:
Synchronizing output:
Viewfinder Display:
5.2
Digital images stored in Dynamic Random
Access Memory (DRAM).
Records images until memory is full and then
stops.
END Continually records images until TRIGGER
button is pressed or trigger signal is received.
CENTER Records images until trigger signal is received.
Saves equal number of frames before and after
the trigger.
RANDOM Records 1, 10 or 50 frames at each trigger
input until memory is full. User can set
number of frames to record on rear panel of
the Processor.
30 60 125 250
512 512 512 512
480 480 480 480
4 4 4 4
4 4 4 4
4 4 4 4
546 full frames with standard memory.
1,365 full frames with memory option 2.
2,184 full frames with memory option 3.
NTSC Step, 1, 2, 5, 10, 15, 30, 60, 120, 240fps, or 1200fps.
PAL Step, 1, 2, 5, 10, 25, 50, 100, 200, or 250fps.
SYNC OUT BNC connector can output vertical
sync or RECORD gate.
ID number, date/time, status, frame number,
play rate, elapsed time, exposure, trigger mode,
frame rate, and x,y coordinates
500 1,000 2,000 3,000
512 256 256 128
240 240 120 120
4 4 4 4
4 4
4
5,000 10,000
128
128
34
80
4 4