Kodak SR series User Manual page 37

Using the System Menu
CHANGING THE SETUP LEVEL [color models only]
Use the s and t arrows to select SETUP LEVEL. Press the MENU/ENTER
button to toggle between a setup level of 7.5 and 0.0. A setup level of 7.5 is
required for NTSC color signals and a setup level of 0.0 is used for PAL color
signals.
CHECKING SYSTEM STATUS
Open the Sytem menu and highlight STATUS. Press the MENU/ENTER button
to open the STATUS screen that appears as follows:
KODAK
Motion Corder Analyzer
Model SR-Ultra-C
The screen gives you the pertinent information about your system. A "C" in the
last character of the model designation indicates a color Motion Corder.
3.18
SCSI ........... Enable
MCDL .......... Enable
Video ............ NTSC
Memory ......... None
System Rev ...... 1.12
04-14-1998 14:14:59