Scsi Download Application Note - Kodak SR series User Manual

SCSI Download Application Note

Revision: 1.2
Rev. Date:August 11, 1998
Scope: This Application Note pertains to the Motion Corder SR Series SCSI
interface software, READCAM.EXE, Version 1.1.0.2.
System Requirements:
Adapters: The SCSI interface adapters successfully tested with the
Motion Corder SR are Adaptec's SlimSCSI 1460 PCMCIA, AHA-
2940U/UW PCI, and AHA-1542CP/CF ISA models. No other SCSI
adapters have been tested with the SR to date.
Operating System: Windows NT 4.0
Software: Digital Download Utility Software - Readcam.exe and
Adaptec EZ-SCSI 4.0. EZ-SCSI 4.0 installs a file, WNASPI32.DLL,
which Readcam.exe requires to run. EZ-SCSI 4.0 is normally included
with every adapter kit. If not, visit Adaptec's web page at
www.adaptec.com
Hardware: IBM compatible PC or Portable PC. High-Density 50-pin
SCSI-2 cable. Single ended High-Density 50-pin active SCSI-2 termi-
nator.
Getting Started:
1. Be sure both the PC and the Motion Corder SR are powered OFF.
2. Connect the High-Density 50-pin cable from the PC's SCSI interface
card to the LOOP THROUGH connector on the Motion Corder SR
unit.
3. Connect a single ended, High-Density 50-pin active SCSI terminator
to the SCSI connector of the Motion Corder SR.
for more information.
A.17