Kodak SR series User Manual page 29

Viewing a Recording
Press the MODE button to enter the Display mode. Press the MENU/ENTER
button to bring up the Display menu on the viewfinder. The menu should appear
as follows:
è
Use the s and t arrows to move up and down the menu. Some of the items in
the menu have a sub menu, press the MENU/ENTER button again to open a sub
menu for the highlighted item. Once you have used the arrow buttons to high-
light your sub menu selection press the MENU/ENTER button again to enter the
new parameter.
NOTE
Press the STOP/ESC button at any time within any menu to exit the menu tree
and return to Display mode.
DISPLAYING A BLOCK OF FRAMES
To review a small portion of your recording, frames 100 through 120 for ex-
ample, follow this procedure.
Use the control panel to stop the playback at frame 100.
l
Press the Menu button, select BLOCK START POINT, and then press
l
the MENU/ENTER button again to select the current frame as the start
point.
Press STOP/ESC to return to playback.
l
Use the Control Panel to move on and stop the playback at frame 120.
l
Press the Menu button, select BLOCK END POINT, and then press the
l
MENU/ENTER button again to select the current frame as the end point.
Select BLOCK DISPLAY and press the MENU/ENTER button to open
l
the sub menu.
Select ON and press the MENU/ENTER button to turn on the Block
l
Display mode.
Press STOP/ESC to return to playback.
l
Press the
l
3.10
- DISPLAY PARAMETERS -
1. BLOCK DISPLAY
2. BLOCK START POINT
3. BLOCK END POINT
4. RETICLE
5. SYSTEM
6. ESC
(Direction) button to playback frames 100 through 120
OFF
OFF