Kodak SR series User Manual page 32

Using the System Menu
USING ELECTRONIC ZOOM
Open the System menu and highlight ZOOM. Press the MENU/ENTER button
to open the ZOOM sub menu that appears as follows:
- SYSTEM PARAMETERS -
2. ZOOM
è
Use the s and t arrows to move up and down the options. Press the MENU/
ENTER button to select the highlighted option. The ZOOM feature is only active
when the display size is set to 256
the Display Size sub menu indicates the magnification with a <X2> or <X4>
next to the display size.
CHANGING THE DATA BORDER DISPLAY
Open the System menu and highlight DISPLAY. Press the MENU/ENTER
button to open the DISPLAY sub menu that appears as follows:
- SYSTEM PARAMETERS -
3. DISPLAY
è
Use the s and t arrows to move up and down the options. Press the MENU/
ENTER button to toggle the highlighted option. The DATE/TIME function
toggles between DATE and TIME with each press of the MENU/ENTER button.
The DISPLAY function toggles through three options, ON1, ON2, and OFF.
ON1 turns on the complete data border. ON2 turns on just the information at the
top of the screen. OFF turns the entire data border off.
OFF
OFF
ON
ESC
240 or 128
X
ALL<DATE>
DATE/TIME DATE
DISPLAY ON1
ESC
120. When ZOOM is turned on
X
3.13