Kodak SR series User Manual page 20

Getting Started
Connect the KODAK Motion Corder Analyzer, SR series components together as
illustrated below:
Plug a power cord into the lower section of the rear panel and then turn on the
power at the front panel. The Motion Corder will come up in Live mode after the
power is turned on and it has performed its self checks successfully.
When the Motion Corder is in Live the Camera video is displayed on the
viewfinder. Notice that the word Live appears in the display on the video moni-
tor to show that the processor is in Live mode. Use Live mode to adjust the lens,
tripod and the lighting for best results. The picture on the monitor is absolutely
accurate as far as composition, focus and exposure are concerned. The images
recorded by your Motion Corder will be as they appear on the viewfinder in Live
mode.
3.1