Kodak SR series User Manual page 33

Using the System Menu
SETTING THE TIME AND DATE
Open the System menu and highlight DATE/TIME SET. Press the MENU/
ENTER button to open the DATE/TIME SET menu that appears as follows:
- SYSTEM PARAMETERS -
4. DATE/TIME
è
Use the s and t arrows to move up and down the options. Press the MENU/
ENTER button to toggle the highlighted option. SET puts the Date and Time
below the menu that appears as follows: 04.03.1998 10:46:29
Use the Menu button to select a character and the s and t arrows to change the
value. Set the time a minute of two ahead so that you can start the Motion Corder
clock at the correct time. Once you have changed the seconds value the Menu
button returns you to the sub menu shown below.
è
Highlight START&ESC and press the Menu button when the time you entered
matches the correct time.
CONFIGURING THE EXTERNAL I/O PORTS
Open the Sytem menu and highlight EXTERNAL I/O. Press the MENU/ENTER
button to open the EXTERNAL I/O menu that appears as follows:
- SYSTEM PARAMETERS -
5. EXTERNAL I/O
è
Use the s and t arrows to move up and down the options. Press the MENU/
ENTER button to toggle the highlighted option.
3.14
SET
SET
ESC
SET
START&ESC
RS232C 4800bps
EXTERNAL SYNC OFF
MCDL DISPLAY OFF
SCSI ID <5>
ESC