Camera - Kodak SR series User Manual

Camera

MOUNTING THE CAMERA
The camera head has four 1/4-20 threaded screw holes for mounting, one on each
side. There are two additional holes per side for a locating pin used by some
tripods. This camera head can also be mounted on the Processor by sliding the
T-Bar on any one of its sides into a matching slot along the sides or the top of
the Processor. In most situations the camera is attached to an adapter plate via
the mounting point on the bottom of the camera head. The adapter plate accepts
the camera head and two small lights.
ATTACHING THE LENS
The camera is equipped with a standard C-mount lens adapter. Insert the lens
into the threads and then rotate the lens clockwise until it stops turning with
gentle pressure. Turn the lens counterclockwise to remove it.
2.6