Kodak SR series User Manual page 21

Preparing to Make a Recording
Before you make a recording you may want to change one or more record
parameters. You can change the exposure time, record mode, frame rate, display
size, ID number and shutter speed plus several other things from the control
panel on the rear of the Processor. The control panel works in conjunction with
the viewfinder to display the choices you need to make.
Use the s and t arrows to change the exposure time when you are in Live mode
and are not in a menu. The current exposure time is shown in the lower left
corner of the viewfinder display.
Press the MENU/ENTER button to display the live menu on the viewfinder. The
menu should appear as follows:
- - - REC PARAMETERS - - -
1. TRIGGER MODE
è
2. FRAME RATE
3. DISPLAY SIZE
4. ID NUMBER
5. GAMMA CORRECTION 1.0
6. SYSTEM
7. ESC
Use the s and t arrows to move up and down the menu. Each of the items in
the menu have a sub menu, press the MENU/ENTER button again to open a sub
menu for the highlighted item. Once you have used the arrow buttons to high-
light your sub menu selection press the MENU/ENTER button a third time to
enter the new parameter.
NOTE
Pressing the STOP/ESC button one or more times, depending on your location
in the menu tree, will return the Motion Corder to Live mode.
3.2
START
250 FPS
512X480
01