Kodak SR series User Manual page 68

SCSI Download Application Note
Notes:
1. Processor must be in LIVE mode before downloading. If download is
attempted in PLAYBACK mode, the error "Can't Detect Camera" is
displayed in the READCAM window.
2. The SCSI ID number of the Motion Corder is selectable via the menu
under System, External I/O. However, if the SCSI ID number is
changed, the Motion Corder must be switched off, then on for the
change to take effect. The default ID is 5.
3. At 3000FPS and higher, Overheat Protection is enabled by default.
This interferes with the boot up and download process. To perform a
download of images recorded at 3000FPS or higher, first record the
image. Second, change the frame rate to any rate less than 3000FPS
(this disables overheat protection). Then begin the download.
4. Sessions are saved in the format "S001TM.1". If a download is made
with the same session ID (S001), the extension is incremented by 1 i.e.
"S001TM.2". The extensions increment from 1-9, then continue from
A-Z. The maximum is 35 folders (downloads) with the same session
number (S001TM.1-Z). If a 36
session ID, the error "Too Many Sessions" is displayed.
5. While download is in progress, "Downloading " is displayed in the
Motion Corder Viewfinder. When download is complete, the proces-
sor is switched from LIVE mode to PLAYBACK mode.
6. If the Reticle is ON, "Downloading " is displayed twice and the
Reticle coordinates appear twice on the M.C. viewfinder along with an
"X". To clear this, a menu must be activated.
th download is attempted with the same
A.19