Kodak SR series User Manual page 23

Preparing to Make a Recording
SELECTING A RECORD MODE (CONTINUED)
E M
ND ODE
Highlight END MODE and press the MENU/ENTER button. To begin recording
first press the REC READY button and then the TRIGGER button. The proces-
sor will record images until you press the TRIGGER button again, or a trigger
signal is received through TRIGGER IN or TRIGGER SW IN. The processor
stops recording the instant the trigger signal is received. The video stored in
memory will contain images covering events up to the time when the trigger
signal was received.
R M
ANDOM ODE
Highlight RANDOM MODE and press the MENU/ENTER button to select one
frame recordings, pressing MENU/ENTER again will select ten frame record-
ings, pressing MENU/ENTER a third time will select fifty frame recordings.
Pressing MENU/ENTER again will cycle you through the same selections again.
To begin recording first press the REC READY button and then the TRIGGER
button. The processor will record 1, 10, or 50 pictures, each time the TRIGGER
button is pressed, or when a trigger signal is received through TRIGGER IN or
TRIGGER SW IN.
SELECTING A FRAME RATE
Open the Live menu and highlight FRAME RATE. Press the MENU/ENTER
button to open the FRAME RATE sub menu. The frame rate options presented
depend on the model Motion Corder that you purchased:
- - - REC PARAMETERS - - -
2. FRAME RATE 250FPS
é
250FPS
è
500FPS
1000FPS
2000FPS
3000FPS
ê
Use the s and t arrows to move up and down the list of frame rates. Press the
MENU/ENTER button to select the highlighted frame rate.
3.4