Viewing A Recording - Kodak SR series User Manual

Viewing a Recording

DISPLAY MODE
All playback functions
are done in the Display
mode. Press the
MODE button to toggle
between Display and
Live mode.
Press the (Direction)
button to playback the
recording in memory
starting with the frame
currently displayed on
the viewfinder. Press
the (Direction)
button again to change
direction of playback
from forward to reverse
or from reverse to
forward. Use the s and
t arrows to increase or
decrease the play rate.
Press the STOP/ESC button once to pause the playback. The word STEP will
appear next to the Frame Number in the data display. You can step forward or
backward one frame at a time by using the s and t arrows.
Press the STOP/ESC button again to go from step to stop. The word STOP will
appear next to the Frame Number in the data display. You can jump to the start
of the recording by pressing STOP/ESC a third time. Pressing STOP/ESC
repeatedly will jump the display between the first frame of the recording and the
frame where you first pressed STOP/ESC.
NOTE
The following note applies to CENTER, END, and RANDOM trigger modes.
If you did not fill the video memory with your last recording, images from a
previous recording can still be seen in playback, or if it is your first recording
since power up the unrecorded frames will display noise. When you make a
recording that does not fill memory, use the Block Display feature to playback
the current recording.
ID Number Date or Time Operating State
Play Rate
<01> 04 -15 -98
FWD30
000000 A: 000
1/250 START
MCDL Digital MCDL Analog A
Exposure Time Trigger Mode
Frame Number
Elapsed Time
STOP 00001
0000.0000sec
X:256 Y:120
B: 000
250FPS
Reticle X,Y Coordinates
MCDL Analog B
Record Frame Rate
3.9