Safety And Regulatory Information; Conventions Used In This Manual; General Safety Guidelines - Kodak 2200 User Manual

1

Safety and Regulatory Information

Conventions Used in This Manual

Note
Notes provide additional information, such
as expanded explanations, hints, or
reminders.
Important
Important highlights critical policy
information that affects how you use this
manual and this product.

General Safety Guidelines

1 August 2006
The information contained in this manual is based on the experience and
knowledge relating to the subject matter gained by Eastman Kodak
Company prior to publication. No patent license is granted by this
information.
Eastman Kodak Company reserves the right to change this information
without notice, and makes no warranty, express or implied, with respect to
this information. Kodak shall not be liable for any loss or damage, including
consequential or special damages, resulting from any use of this information,
even if loss or damage is caused by Kodak's negligence or other fault.
CAUTION
:
Caution points out procedures that you must follow precisely to avoid
damage to the system or any of its components, yourself or others, loss
of data, or corruption of files in software applications.
• This product is designed and manufactured to ensure maximum safety
of operation. Operate and maintain it in strict compliance with the safety
precautions and operating instructions contained in this manual.
• This product meets all the safety requirements applicable to medical
equipment. However, anyone attempting to operate the system must be
fully aware of potential safety hazards.
• There are no user serviceable parts in this system. The product must be
installed, maintained, and serviced by qualified service personnel
according to procedures and preventive maintenance schedules in the
product service manual. If your product does not operate as expected,
contact your Service Representative.
• Do not modify this product in whole or in part without prior written
approval from Eastman Kodak Company.
• The assembly, extensions, adjustments, modifications, and repairs must
be performed by an authorized Service Representative. Your radiology
system must be installed in premises that comply with applicable
standards.
• Personnel operating and maintaining this system should receive training
and be familiar with all aspects of operation and maintenance.
SM701_K2200_2_en 1-1