Warnings And Safety Instructions - Kodak 2200 User Manual

Warnings and Safety Instructions

1-2
• To ensure safety, read all user manuals carefully before using the system
and observe all Caution, Important, and Note callouts located
throughout the manual.
• Keep this manual with the equipment.
• Reading this manual does not qualify you to operate, test, or calibrate
this system.
• Unauthorized personnel are not allowed access to the system.
• If the product does not operate properly or fails to respond to the
controls as described in this manual:
• Follow the safety precautions as specified in this manual.
• Stop using the equipment and do not make or authorize any changes
to it.
• Immediately contact your Service Representative, report the problem,
and await further instructions.
• X-ray systems manufactured by Eastman Kodak Company comply with
safety standards throughout the world for optimum protection against
radiation risks.
• Be aware of the product specifications and of system accuracy and
stability limitations. Consider these limitations before making any
decision based on quantitative values. If you have any doubts, consult
your Sales Representative.
CAUTION
:
X-rays can be dangerous if used incorrectly. Take precautions even when
following the instructions in this manual.
Use conventional commercially available equipment to protect yourself
and your
CAUTION
:
against scattered radiation risks.
• If you fail to comply with these instructions, Eastman Kodak Company
will not be responsible for the safety reliability, and characteristics of the
equipment.
CAUTION
:
Do not operate the equipment in the presence of explosive liquids,
vapors, or gases. Do not plug in or turn on the system if hazardous
substances are detected in the environment. If these substances are
detected after the system has been turned on, do not attempt to turn off
the unit or unplug it. Evacuate and ventilate the area before turning off
the system.
DANGER: THIS IS AN ELECTRICAL UNIT. DO NOT EXPOSE IT
TO WATER SPRAY. SUCH ACTION MAY CAUSE AN
ELECTRICAL SHOCK OR A MALFUNCTION OF THE
UNIT.
SM701_K2200_2_en 1 August 2006