Changing The User Parameters - Ricoh 3245 - Type Print Server Facsimile Reference Manual

Administrator Setting
Switch
32
34

Changing the User Parameters

Preparation
Access to some User Parameter
Settings requires installation of op-
tional equipment, or that other set-
tings be made beforehand.
Important
❒ We recommend you print and
keep a User Parameter list when
you program or change a User Pa-
rameter. See p.171 "Printing the
User Parameter List".
❒ Do not change any bit switches
9
other than those shown on the pre-
vious pages.
A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press [Facsimile Features].
C C C C
Press [Administrator Tools].
D D D D
Press [Parameter Setting].
170
Bit Item
0 Quotation Priority for a desti-
nation when there is no desti-
nation of the specified type.
0 Use gatekeeper server with
IP-Fax
1 Use SIP server with IP-Fax
0
Paper Output Pri-
ority <Priority Or-
der>
1. IP-Fax destina-
tion
2. Fax number
3. E-mail address
4. Folder
Off
Off
E E E E
Select the switch number you
want to change.
F F F F
Select the bit number you want to
change.
When the bit number is pressed,
the current value switches be-
tween 1 and 0.
Note
❒ Repeat from step
another bit number for the same
switch.
G G G G
Press [OK].
1
Electronic Output
Priority <Priority
Order>
1. E-mail address
2. Folder
3. IP-Fax destina-
tion
4. Fax number
On
On
F
to change