Manual Dial - Ricoh 3245 - Type Print Server Facsimile Reference Manual

Other Transmission Features

Manual Dial

The external telephone is required.
Pick up the handset of the external
telephone and dial. When the line is
connected and you hear a high-
pitched tone, press the { { { { Start} } } } key to
send your fax message. If, on the oth-
er hand, you hear a voice at the other
end, continue conversation as nor-
mal.
Limitation
4
❒ This function is not available for
the optional extra G3 interface
unit, Internet Fax and IP-Fax.
❒ If Immediate TX Result Report
(Immediate Transmission) is print-
ed, the result of a transmission
with Manual Dial is not mentioned
in the report.
A A A A
Place the original, and then select
the scan settings you require.
Reference
p.11 "Placing Originals", Fac-
simile Reference <Basic Features>
p.28 "Scan Settings", Facsimile
Reference <Basic Features>
B B B B
Pick up the external telephone.
You will hear a tone.
C C C C
Dial.
The machine immediately dials the
destination.
58
Note
❒ If you make a mistake, replace
the external telephone, and then
try again from step
D D D D
When the line is connected and
you hear a high-pitched tone,
press the { { { { Start} } } } key to send your
fax message.
The transmission starts.
Note
❒ If you hear a voice, tell the re-
ceiver that you want to send
them a fax message (ask them to
switch to facsimile mode).
E E E E
Replace the handset of the exter-
nal telephone.
After transmission, the standby
display appears.
Note
❒ If you want to cancel a transmis-
sion, press the { { { { Clear/Stop} } } } key,
and then remove the originals.
B
.