Registering A Priority Function Using A Program - Ricoh 3245 - Type Print Server Facsimile Reference Manual

Simplifying the Operation
B Perform the Send Later setting
till the procedure of pressing
[OK] to return to the standby
mode.
Reference
p.3 "Sending at a Specific
Time (Send Later)"
B B B B
Make sure that the machine is in
facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the { { { { Facsimile} } } } key.
C C C C
Press the { { { { Program} } } } key.
D D D D
Make sure that [Register] is selected.
7
E E E E
Select a program number in which
"*Not Stored" is shown.
Note
❒ If you make a mistake, press
[Cancel] and select a program
number again.
130
❒ When you change a Keystroke
Program, press [Register] after
pressing the program number
you want to change. If you
make a mistake, press [Do not
Register] and return to step
F F F F
Enter the program name, and then
press [OK].
The standby display appears.
Note
❒ If you make a mistake, press
[Backspace] or [Delete All], and
then try again.
❒ You should register the pro-
gram name.
❒ To cancel a programmed pro-
gram, press [Cancel]. The dis-
play returns to that of step
ZLFS310N
Reference
"Entering Text", General Set-
tings Guide
Registering a priority function using a
program
You can select whether or not the
function registered in program No. 1
will be set after the power is turned
on or the { { { { Clear Modes} } } } key is pressed.
After registering a function in pro-
gram No. 1, select [Program No.1] for
[Change Initial Mode] on the Facsimile
Features menu. See p.144 "General
Settings/Adjustment".
Limitation
❒ You cannot register the following
using program No.1:
• Any destination
• Store File
• Polling Transmission
• Sender Settings
• Specifying a stored file
• Enter Subject of E-mail Options
E
.
E
.