Transmission Mode; Sending At A Specific Time (Send Later) - Ricoh 3245 - Type Print Server Facsimile Reference Manual

Sending at a Specific Time (Send Later)

Using this function, you can instruct
the machine to delay transmission of
your fax message until a specified lat-
er time. This allows you to take ad-
v a n t a g e o f o f f - p e a k t e l e p h o n e
charges without having to be by the
machine at the time.
If you have a non-urgent fax, select
Send Later with Economy Transmis-
sion when you scan it. Faxes will be
queued in memory and sent during
Economy Transmission Time.
Important
❒ After the machine has been switched
off for about one hour, all fax mes-
sages stored in memory are lost. If
messages are lost for this reason, a
Power Failure Report is automati-
cally printed when the operation
switch is turned on. Use this report
to identify lost messages.
Limitation
❒ This function is unavailable with
Immediate Transmission. Use
Memory Transmission.

1. Transmission Mode

❒ You can specify a time within 24
❒ If the current time shown is not
❒ If the document is sent before the
❒ For convenience, you can program
❒ You can program one of the Quick
A A A A
B B B B
Note
hours.
correct, change it. See "Timer Set-
ting", General Settings Guide.
specified time, the Communication
Result Report is printed and the job
is completed.
the time when your phone charges
become cheaper as the Economy
Transmission Time. See p.146
"Program Economy Time".
Operation keys with operations for
this function. Using the quick op-
eration key allows you to omit step
B. See p.144 "General Settings/Ad-
justment".
Place the original, and then select
the scan settings you require.
Reference
p.11 "Placing Originals", Fac-
simile Reference <Basic Features>
p.28 "Scan Settings", Facsimile
Reference <Basic Features>
Press [Transmission Mode].
3