One-Touch Calling; Paging - NEC 910i Installation And User Manual

Off Hook Signaling
If the extension you call has Handsfree . . .
When your Off Hook signal voice-announces, your co-worker can respond by just speaking toward their phone. Their telephone's
Handsfree microphone picks up their voice. Your co-worker's initial call continues uninterrupted.
If the extension you call does not have Handsfree . . .
Your co-worker receives Off-Hook Signaling ring. They must first place their initial call on Hold before they can respond to you.
They cannot just speak toward their phone.
To send Off Hook Signals to an extension busy on a handset call:
1. Press 7.
OR
1. FUNCTION KEY (Off Hook Signaling).
If you hear ringback tone, dial 1 to have your call voice-announce (and visa-versa).
To have Off Hook Signals ring your extension:
1. TALK + 893.
To answer an Off Hook Signal at your extension, you must first hang up your current call or place it on Hold.

One-Touch Calling

Use your One-Touch Keys for one button access to co-workers, outside lines and selected system features. You'll find this a great
time saver when calling the clients and co-workers you talk to most often. Instead of dialing the codes, just press the One-Touch
Key.
Your One-Touch Keys give you:
●
Direct Station Selection - One button access to your co-worker's extensions.
●
Abbreviated Dialing - One button access to Common and Group Abbreviated Dialing bins.
●
Feature Codes - One button access to Feature Codes (e.g., 2 for Callback).
●
Chain Dialing - Linking two or more One-Touch Keys for lengthy dialing scenarios.
These keys must be assigned in system programming. Ask your communications manager for further information.
To use a One-Touch Key:
1. FUNCTION KEY (One-Touch).
If you press a line key before pressing a One-Touch Key for outside calling, the system automatically removes
any stored trunk codes.
To chain the functions of two One-Touch Keys:
1. FUNCTION KEY (One-Touch).
Let the stored number dial out.
2. Press another FUNCTION KEY (One-Touch).
The stored digits dial out.

Paging

Internal Paging
Need to locate a co-worker or make an announcement? Use Internal Paging. Your system can have All Call Internal Paging and up to
64 zones of Internal Paging. When you make an All Call Paging announcement, your voice broadcasts to all extensions set to receive
All Call Paging. When you make a Zone Paging announcement, your voice broadcasts to all the idle extensions in the zone you
called.
To make an Internal Page:
1. TALK + FUNCTION KEY (Internal Paging).
OR
1. TALK + 801 + Zone.
Internal Paging zones are 00-64 (00 is All Call Internal Paging).
2. Make announcement, then TALK to hang up.
2-30
i-Series System