Last Number Redial; Line Callback; Meet-Me Conference - NEC 910i Installation And User Manual

Onyx VSi System

Last Number Redial

With Last Number Redial, you can easily call the last outside number you dialed. Each time you place an outside call, the system
saves the number you dialed (up to 24 digits). You can redial the call whether it was answered, unanswered or busy. Redial uses the
same line to dial out unless you select a different line.
To place a call using Last Number Redial:
1. Press TALK + Line Key (if redialing an outside number) + LND on the handset.
OR
1. Press TALK.
2. Press **.
If you hear busy tone, press an idle line key. Your call dials out automatically.

Line Callback

You can leave a Callback request for a busy outside line. The system rings you when the outside line is available. You do not
need to keep checking the line, hoping to find it idle. To leave a Callback for an extension, see the Callback feature.
To request a Callback for an outside line on a line key:
1. Press the illuminated line key.
You hear busy tone.
2. Dial C.
Busy tone stops.
3. Press TALK.
Use your phone for other calls while you wait for Callback to ring you back.
To request a Callback after dialing a code for an outside line:
1. Dial C and press TALK.
You can use your phone for other calls while you wait for Callback to ring you back.
To answer when Callback rings you back.
1. Press TALK.
You hear dial tone on the line you requested.
2. Place call.
To cancel a Callback request to a specific line:
1. Try to access busy line again.
You hear busy tone.
2. Press * and hang up.
To cancel all your Callbacks simultaneously:
(This also cancels your Intercom Callbacks.)
1. Press TALK.
2. Press # *.
3. Press TALK.
This feature is always available.

Meet-Me Conference

2-57