Ringdown; Save Number Dialed - NEC 910i Installation And User Manual

Reverse Voice Over
When You're On a Call
To place a Reverse Voice Over Call:
1. Press and hold FUNCTION KEY (Reverse Voice Over).
To return to your initial caller:
1. Release FUNCTION KEY (Reverse Voice Over).
When Your Phone is Idle
To place a call to your Reverse Voice Over destination:
1. TALK + FUNCTION KEY (Reverse Voice Over).

Ringdown

Call a co-worker or outside party by just pressing TALK on your handset. The call goes through automatically -- there is no need
to dial digits. There are two types of Ringdown: Ringdown Extension and External Hotline. With Ringdown Extension, you reach
another extension (typically a lobby or service phone) when you press TALK. If your phone has External Hotline, your phone
automatically dials a specified Common Abbreviated Dialing number instead. If you want either of these Ringdown options on
your phone, talk to your Communications Manager.
When a user presses TALK on a Ringdown Extension, the ringdown occurs after an interval that is set in system programming.
Try to monitor this operation. If the interval is too long, unauthorized users may have time to call your co-workers or use system
features. (External Hotline always occurs as soon as you press TALK.)
To use Ringdown:
1. TALK.
To bypass Ringdown (for Ringdown Extension only):
1. Do not press TALK.
2. Press line key for outside call
OR
2. TALK + Place Intercom call before Ringdown goes through.
To answer a call if you are a Ringdown Destination:
1. Press TALK if call rings.

Save Number Dialed

While on an outside call, you can save the number you just dialed and easily dial it later on. This lets you quickly redial a busy
or unanswered number without manually dialing any digits. Your system remembers your saved number until you save a new one
in its place. You can also quickly redial your last call using Last Number Redial.
To save the outside number you just dialed:
Use the following procedure before hanging up.
1. FUNCTION KEY (Save Number Dialed).
The number you save can be up to 24 digits long, using 0-9, # and *.
To redial a Saved Number:
1. Press a line key + FUNCTION KEY (Save Number Dialed).
The stored number dials out.
OR
1. TALK.
2. Dial 815.
OR
2. TALK + FUNCTION KEY (Save Number Dialed).
Save Number Dialed selects a line from the same group as your original call. The stored number dials out.
2-36
i-Series System