Intercom Calls; Transfer - NEC 910i Installation And User Manual

Hold
For a line you placed on Hold that does not appear on your phone:
1. Press TALK.
2. Press HOLD.
OR
For a line somebody else placed on System Hold that does not appear on your phone:
1. Press TALK.
2. Press *.
3. Dial the line access code (e.g., 801) or extension number.
To retrieve an Intercom call from Hold:
1. Press TALK.
2. Press HOLD.

Intercom Calls

You can voice-announce your Intercom call to a keyset phone or have the called extension ring. When you voice-announce, the
other party hears you over the phone speaker and can speak Handsfree. Keep in mind when using Intercom, you may not be able
to voice-announce to some extensions.
To place an Intercom call:
1. Press TALK.
You hear dial tone.
2. Dial extension number.
-You hear ringing. Wait for the party to answer.
OR
-You hear two beeps and can begin speaking.
-To force the phone to ring, dial 1 before you dial the extension number.
To answer a ringing Intercom call:
1. Press TALK.

Transfer

You can Transfer a call to another extension. If the other party does not answer the transferred call, you can retrieve it.
You can also Transfer a call from the handset to your optional "desk" phone if you need to place the cordless phone back into the
desk unit for recharging.
To Transfer your call to another extension:
(Do Not Hang Up.)
1. Press CONF and dial the extension number.
You can press a Hotline key instead of dialing the extension number.
2. Announce the call.
-If you hear ringing, wait for the party to answer before announcing the call. To Transfer the call unan-
nounced, skip this step.
-If you hear a busy tone, you can dial 'C' to wait in line. Refer to the Camp-On feature for further informa-
tion. Also, your display shows, "HOLD/WAIT". This indicates the number of calls on Hold or already
Camped-On to the busy extension.
3. Press TALK or place handset in desktop charger to hang up.
To retrieve a transferred outside call:
1. Press TALK.
2. Press the flashing line key for the call.
2-48
This feature is always available.
Onyx VSi System