Conference; Conference, Unsupervised; Directed Call Pickup - NEC 910i Installation And User Manual

Conference

Conference
Conference allows you to converse jointly with two inside parties, two outside parties or one of each.
To set up a Conference:
1. Place first call.
2. Press CONF.
3. Place next call.
4. Press CONF.
All three parties are Conferenced.
To cancel a Conference:
1. Press TALK.
If your Conference included an Intercom call, your caller continues to converse after you hang up.
OR
1. Place Conference on Hold.
2. Disconnect one of your callers.
3. Hang up on your remaining caller.

Conference, Unsupervised

Use Unsupervised Conference when you want to join two outside callers in a Conference -- then leave the Conference and allow
them to talk privately. Once you set up this type of Conference, it continues until one of the outside callers hangs up. You cannot
rejoin the Conference or terminate it from your phone.
To set up an Unsupervised Conference:
1. Place or answer first outside call.
You talk to the first caller.
2. Press CONF.
3. Place or answer second outside call.
You talk to the second caller.
4. Press CONF again.
You talk to both callers.
5. Press TALK.
Your callers talk privately with each other. You cannot rejoin the Conference.

Directed Call Pickup

Directed Call Pickup allows you to answer a call ringing another extension. You may also have Call Coverage keys on your
phone. You can use these keys instead of Directed Call Pickup to answer a call to the covered extension. Refer to the Station Call
Coverage feature for further information.
To Pickup a call ringing at another phone:
(You can program this on a Feature key. Refer to "Speed Dial" for further information.
1. Press TALK.
2. Press *.
3. Dial the ringing extension number.
You are connected to the caller.
This procedure also picks up a call on System Hold or Parked at the extension you dial. Refer to the Hold and
Park features.
2-54
This feature is always available.
Onyx VSi System