Before You Begin; Phone Connections - Cisco SPA 504G User Manual

Installing Your Phone

Before You Begin

Before You Begin
NOTE
!
CAUTION

Phone Connections

Cisco Small Business Pro IP Phone SPA 504G User Guide (SIP)
Before you install and connect your phone, verify with your System Administrator (if
applicable) that the network is ready for the phone, read the safety notices, and make sure you
have all the phone parts and documentation available.
The RJ-11 port marked "AUX" is reserved for connection with the Cisco SPA 500S Attendant
Console that works with the IP phones. It is not for use as a telephone line port.
CAUTION: Do not plug a telephone line cord into the port marked "AUX."
The following photo shows where you need to connect parts of the phone.
Figure 1 Phone Connections
2
10