Adjusting Call Volume And Muting; Adjusting Call Volume; Adjusting The Ringer Volume; Using Mute - Cisco SPA 504G User Manual

Using Basic Phone Functions

Adjusting Call Volume and Muting

Adjusting Call Volume and Muting

Placing or Answering a Call

NOTE
Cisco Small Business Pro IP Phone SPA 504G User Guide (SIP)
You can also change call volume settings from your PC using the IP Phone Web Interface. See
"Adjusting Audio Volume" section on page

Adjusting Call Volume

To adjust the volume of the handset or speaker, lift the handset or press the Speaker button.
Press + on the Volume button to increase the volume, or press - to decrease the volume. Press
Save (except on the Cisco SPA 501G model)

Adjusting the Ringer Volume

To adjust the ringer volume, press the Volume button when the handset is on the phone and the
speaker button is off. Press Save.

Using Mute

To mute the phone microphone, speaker, or headset microphone, press the Mute button on the
phone. The button glows red. Press the Mute button again to unmute.
If no audio device is on, pressing the Mute key has no effect. When switching from the
speaker phone to the handset, mute is turned off automatically.
You may have to dial a number or numbers to reach an outside line. Ask your phone
administrator.
To place or answer a call, do one of these:
• Pick up the receiver.
• Press the Speaker button.
59.
3
26