Using Phone Hardware And Accessories; Using The Speakerphone; Using The Headset With Your Ip Phone; Switching Between The Handset/Headset/Speakerphone During A Call - Cisco SPA 504G User Manual

Using Basic Phone Functions

Using Phone Hardware and Accessories

Using Phone Hardware and Accessories
NOTE
Cisco Small Business Pro IP Phone SPA 504G User Guide (SIP)
• Setting or Changing a Phone Password, page 44
• Accessing Voicemail, page 44
• Recording Calls (Virtual Office Pro Users Only), page 44

Using the Speakerphone

To use the speakerphone, press the Speaker button (the handset can be either on or off hook).

Using the Headset with Your IP Phone

Install the headset as described in the
section on page 19.
Steps to use your headset with the IP phone may vary. Consult the user documentation for your
headset for more information.
To use a wired headset, press the Headset button on your phone and dial the number to place a
call, or press the headset button to answer a ringing call.
To use a wireless headset, lift the receiver off hook before speaking or listening through the
headset.

Switching Between the Handset/Headset/Speakerphone During a Call

Any of these audio devices can be used during a call. Only one device at a time can be used.
The handset can be on the hook when using the speakerphone or headset function. If switching
from the handset to the speakerphone, make sure the speakerphone or headset light is
illuminated before placing the handset back on the hook. (If you are switching from the
handset to a wireless headset, however, do not replace the handset or you will disconnect the
call.)
"Connecting Wired and Wireless Headsets (Optional)"
3
24