Configuring Date And Time Parameters On Your Phone; Setting Your Phone's Date And Time; Advanced Procedures For Technical Support Personnel - Cisco SPA 504G User Manual

Using Advanced Phone Features

Configuring Date and Time Parameters on Your Phone

Configuring Date and Time Parameters on Your Phone
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6

Advanced Procedures for Technical Support Personnel

!
CAUTION
STEP 1
Cisco Small Business Pro IP Phone SPA 504G User Guide (SIP)

Setting Your Phone's Date and Time

The date and time for your phone normally come from the SIP proxy server or NTP server.
However, if you need to change some date and time parameters, you can follow these steps:
Press the Setup button.
Select Time/Date.
Enter the date in the following format: mm*dd*yy (this will display as m/d).
Enter the time in the following format: hh*mm*ss (this will display as (h:mm).
If the time does not display am (a) or pm (p) correctly, adjust with Offset. To change from a.m.
to p.m., enter *12*00*00, to change from p.m. to a.m., enter #12*00*00.
Press save.
You can set just one of these choices, if necessary.
These menus are used to configure and troubleshoot your phone and the phone network. You
should not change these settings or perform these actions unless directed to do so by your phone
administrator or by your 8x8 Support Team. Errors can interrupt your service.
To access advanced menus, follow the procedures below.
Press the Setup button.
4
51