Error Code And Error Status Names - Toshiba Tecra M2V Maintenance Manual

3.19 Error Code and Error Status Names

3.19 Error Code and Error Status Names
Table 3-2 lists the error codes and error status names for the Diagnostic Test.
Table 3-2 Error codes and error status names (1/3)
Device name
(Common)
System
Memory
Keyboard
Display
FDD
TECRA M2V Maintenance Manual (960-476)
Error code
FF Data Compare Error
01 ROM Checksum Error
03 ROM Serial ID Write Error
04 ROM Not Supported PS-System
05 ROM Sensing Error (AC-adapter)
06 ROM Sensing Error (1
07 ROM Sensing Error (2
08 ROM Thormistor Error (1)
09 ROM Thormistor Error (2)
10 ROM Thormistor Error (3)
01 RAM Parity Error
02 RAM Protected Mode Not Changed
DD RAM Cache Memory Error
FE USB Get Descr.Error (First)
FD USB Set Address Error
F0 HUB Get Descr.Error (Top 8B)
F1 HUB Get Descr.Error (Whole)
F2 HUB Set Configuration Error
F3 HUB Get Descr.Error (Descr.)
F4 HUB Set Feature Error (P ON)
F5 HUB Get Status Error
F6 HUB Set Feature Error (Reset)
F7 HUB Clear Feature Error
F8 HUB Clear Feature1 Error
F9 HUB Set Feature Error (Enab.)
FA HUB Clear Feature2 Error
EF USB Over Current Error
ED USB Get Descr.Error (Second)
EE VRAM Size Not Support
01 FDD Bad Command Error
02 FDD Address Mark Not Found
03 FDD Write Protected
04 FDD Record Not Found
06 FDD Media Removed
08 FDD DMA Overrun Error
09 FDD DMA Boundary Error
10 FDD CRC Error
20 FDD FDC Error
40 FDD Seek Error
60 FDD Not Drive Error
80 FDD Time Out Error
EE FDD Write Buffer Error
3 Tests and Diagnostics
Error status name
st
Battery)
nd
Battery)
3-47