Toshiba Tecra M2V Maintenance Manual page 284

Personal computer

Hide thumbs Also See for Tecra M2V:

Table of Contents

4 Replacement Procedures

Installing the Hinge

To install the hinge, follow the steps below and refer to figures 4-55 to 4-58.

1. Pass the LCD cable through the hole.

2. Set the both sides hinges and secure them with the following screws (on the back).

3. Secure the both sides hinges with the following screws.

4. Secure the following screws and stick the mask seals.

5. Install the hinge cap.

6. Set the LCD cable holder and secure it with the following screw.

Tapping screw

FLAT HEAD screw

TECRA M2V Maintenance Manual (960-476)

Chapters

Table of Contents