Hdc Status - Toshiba Tecra M2V Maintenance Manual

3 Tests and Diagnostics
3.22.2 Operations
Selecting 5 and pressing Enter in the DIAGNOSTIC MENU, logs error information into RAM
or onto a floppy disk. The error information is displayed in the following format:
XXXXX ERRORS
CNT TS-No PASS STS ADDR
001 EXP01 0000 XXX 00000000 00 00 0000
001 EXP03 0000 XXX 00000000 00 00 0000
Pass count
Subtest number
Test name
Error count
[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]
1. The error information displayed on the screen can be manipulated by the following
number keys:
1 scrolls the display to the next page.
2 scrolls the display to the previous page.
3 returns to the Diagnostic Menu.
4 erases all error log information in RAM.
5 outputs the error log information to a printer.
6 reads the log information from a floppy disk.
7 writes the log information to a floppy disk.
2. In the case of "error retry OK", a capital "R" will be placed at the beginning of the error
status. However, it is not added to the error count.
3-54
WD RD HSTS
Address
Error status
Read data
Write data
[ERROR STATUS NAME]
FDD-WRITE PROTECTED
FDD-TIME OUT ERROR

HDC status

Error status name
TECRA M2V Maintenance Manual (960-476)
3.22 Log Utilities