Toshiba Tecra M2V Maintenance Manual page 249

4.15 Sound board
Installing the Sound board
To install the sound board, follow the steps below and refer to figures 4-30 and 4-31.
1. Install the sound board from the right side.
2. Connect the sound board cable to the connector PJ9511 on the sound board and the
connector PJ9501 on the system board.
3. Connect the sound board flexible cable to the connector PJ9510 on the sound board
and the connector PJ9500 on the system board.
4. Install the HDD con holder and secure it with the following screw.
• M2.5×4B FLAT HEAD screw
TECRA M2V Maintenance Manual (960-476)
4 Replacement Procedures
×1
4-49