Error Code And Error Status Names - Toshiba satellite A20 series Maintenance Manual

3.19 Error Code and Error Status Names

3.19 Error Code and Error Status Names
Table 3-2 lists the error codes and error status names for the Diagnostic Test.
Table 3-2 Error codes and error status names (1/3)
Device name
(Common)
System
Memory
USB
Satellite A20 Maintenance Manual (960-444)
Error code
FF Data Compare Error
01 ROM Checksum Error
03 Serial ID Write Error
04 Not supported PS-System
05 Sending Error For AC-Adopter
06 Sending Error For 1st Battery
07 Sending Error For 2nd Battery
08 Thormistor error (1)
09 Thormistor error (2)
10 Thormistor error (3)
01 RAM Parity Error
02 Protected Mode Not Changed
0D Cache Memory Error
EE USB-NO DESCR. ERROR
FE USB-GET DESCR. ERROR (FIRST)
FD USB-SET ADDRESS ERROR
F0 HUB-GET DESCR. ERROR (Top 8B)
F1 HUB-GET DESCR. ERROR (Whole)
F2 HUB-SET CONFIGURATION ERROR
F3 HUB-GET DESCR. ERROR (DESCR.)
F4 HUB-SET FEATURE ERROR (P ON)
F5 HUB-GET STATUS ERROR
F6 HUB-SET FEATURE ERROR (RESET)
F7 HUB-CLEAR FEATURE ERROR
F8 HUB-CLEAR FEATURE1 ERROR
F9 HUB-SET FEATURE ERROR (Eanab.)
FA HUB-CLEAR FEATURE2 ERROR
EF USB-OVER COUNT ERROR
ED USB-GET DESCR. ERROR (SECOND)
3 Tests and Diagnostics
Error status name
3-51