Toshiba Tecra M2V Maintenance Manual page 130

3 Tests and Diagnostics
Subtest 05 USB Test
This Subtest checks USB. The USB TEST Module (ZD0003P01) and USB
Cable (ZD0003P02) must be connected to the computer.
The following message will appear. Select a port to test and press Enter.
Test port number select (1:Port0, 2:Port1, 3:Port2) ?
If the test ends successfully, OK is displayed. If nothing is displayed, there
may be a problem with the USB port. Check the wraparound connection and
repeat the test.
Subtest 07 InTouch/Presentation key
When this subtest displays messages shown below in order, press the
corresponding button.
NOTE: This subtest tests the functions of Console button and Presentation button. Press
the Console button when the message "Press [InTouch] key" is displayed.
This subtest must be completed within 10 seconds.
3-16
Press [ InTouch ] key
Press [ Presentation ] key
3.6 Keyboard Test
TECRA M2V Maintenance Manual (960-476)