Toshiba Tecra M2V Maintenance Manual page 214

4 Replacement Procedures
NOTE: The following steps describe how to disassemble the HDD pack; however, do not
disassemble if the HDD is working properly.
4. Place the HDD pack on a flat surface, and remove the following screws.
• M3×4Z
5. Separate the HDD from the HDD bracket.
CAUTION: Do not apply pressure to the top or bottom of the HDD.
M3×4Z FLAT HEAD
4-14
FLAT HEAD screw
HDD
Figure 4-6 Separating the HDD
×4
HDD bracket
M3×4Z FLAT HEAD
TECRA M2V Maintenance Manual (960-476)
4.5 HDD