Table of Contents
Advertisement
Canopy Screw (4)
Step_1._ Carefully tuck the wires around the
Receiver and Hanging Bracket as not to loosen the
wire caps.
Step_2._ Insert 2 Canopy Screws into the Hanging
Plate diagonally across from each other so they
match the keyholes on the canopy.
WARNING:_ Do not let wires
become lodged between
Hanger Bracket and Canopy.
Step_3._ Raise the Canopy over the Hanger Bracket.
Align the partially installed screws with the key slots
in the canopy.
Step_4._ Twist the Canopy clockwise to secure.
Step_5._ Install the third & fourth canopy screws in
the round holes on Canopy. Securely tighten all four
screws.
Step_6._ Using both hands, push the Canopy Trim
ring up to the top of the Canopy.
Step_7._ Twist the Canopy Trim ring clockwise to
secure it to the Canopy.
CANOPY HARDWARE
SECURING THE CANOPY
Round
Hole
t
™
ercera
Screw Driver
Canopy_Screws
Keyhole_Slots
Keyhole_Slot
13
Advertisement
Table of Contents
