Table of Contents
Advertisement
Screw Driver
Step_1._ Locate the blade slot on the side of the fan
as shown in Figure 1., and insert the blade into the
slot.
Step_2._ Align the holes in the blade with the holes
on the fan as shown in Figure 2.
Step_3._ Insert the Blade Screws into the Washers
then Grommets.
Step_4._ Insert the Blade Screw, Washer, and
Grommet through the blade and screw into the
fan using either the provided Screw Driver or a
standard Phillips head. Once all 3 Screws and
Grommets have been installed, tighten securely.
CAUTION:
Blade screws must be tightened securely
before operating the fan.
Step_5._ Repeat steps 3 and 4 for the remaining two
blades.
14
BLADE HARDWARE
Blades (3)
Grommets (9)
BLADE INSTALLATION
Blade Washers (9)
Blade Screws (9)
Blade
Blade_Slot
FIGURE_1.
FIGURE_2.
FIGURE_3.
Advertisement
Table of Contents
