Table of Contents
Advertisement
E11 50W Halogen Bulb
Step_1._ Install both Halogen Bulbs into the Light
Kit. Figure 1.
Note: When replacing bulbs, only replace with max
50 watt bulbs.
IMPORTANT ! When installing the halogen bulb,
carefully cut off the end of the plastic sleeve the
bulb comes in and hold the bulb by the plastic
sleeve to screw it into the socket.
Step_2._ Position the indentations in the outer rim of
the glass shade so that they line up with the tabs on
the inside surface of the fan light fixture rim.
Step_3._ Carefully lift the glass shade up inside the
light fixture as far as it will go. Figure 2.
Step_4._ Rotate the shade in a clockwise direction
until it is held tightly in place by the four tabs. Figure
3.
t
LIGHT HARDWARE
LIGHT INSTALLATION
™
ercera
Glass Assembly
FIGURE_1.
FIGURE_2.
FIGURE_3.
15
Advertisement
Table of Contents
