Installing The Canopy - Casablanca Tribeca Owner's Manual And Installation Manual

Hide thumbs Also See for Tribeca:

Table of Contents

4-5 . Using the large wire connectors, connect the white wire (grounded)

and the black wire (ungrounded) from the ceiling as follows:

• The white (grounded) wire from the ceiling to the white wire from

the receiver (marked on red tag "NEUTRAL IN")

• The black (ungrounded) wire from the ceiling to the black wire from

the receiver (marked on red tag "LIVE IN")

4-6 . Check each connection to make sure no bare wire or wire strands are

visible . Turn wire connectors upward and push them up into the outlet

box . Be sure to separate the grounded wires from the ungrounded

wires inside the outlet box .

4-7 . Position the receiver in the canopy so that the antenna is close to the

edge of the ceiling bracket for clear reception .

5-1 . Raise the canopy over the ceiling bracket and

align the two holes of the canopy and the

ceiling bracket .

5-2 . Insert and tighten the canopy screws securely .

Step 5-1

4 • Wiring Your Ceiling Fan (continued)

5 • Installing the Canopy

Hanger

Bracket

Canopy Screw

Canopy

M6000-01 • 08/22/14 • Casablanca Fan Company

Steps 5-2

Step 4-5

Canopy

Screw

Table of Contents

Show Quick Links

Table of Contents