Installing The Canopy - Casablanca Tribeca Owner's Manual And Installation Manual

CAUTION: Be sure no bare wire or wire strands are visible after
making connections.
Dual Switch Wiring:
4-7. Connect the green or bare wire (grounding) from the ceiling to the
green wire with yellow stripe (grounding) from the ceiling bracket
to the green wire with yellow stripe (grounding) from the fan. See
image on previous page.
4-8. Connect the white wire (grounded) from the ceiling to the white wire
from the fan.
4-9. Connect the black wire (ungrounded) from the ceiling to the black
wire from the fan.
4-10. Connect the blue wire from the fan to the black wire with white
stripe (ungrounded) from the wall switch.
4-11. After all connections are made, turn wire connectors upward and
push them up into the outlet box. Be sure to separate the grounded
wires from the ungrounded wires inside the outlet box.
5-1. Raise the canopy over the ceiling bracket and
align the two holes of the canopy and the
ceiling bracket.
5-2. Insert and tighten the canopy screws securely.
Step 5-1
4 • Wiring Your Ceiling Fan (continued)
5 • Installing the Canopy
Hanger
Bracket
Canopy Screw
Canopy
M6001-01 • 04/16/12 • Casablanca Fan Company
Steps 5-2
10
Steps 4-8 - 4-10
Canopy
Screw