Qualified Electrician; Wiring Your Ceiling Fan - Casablanca Tribeca Owner's Manual And Installation Manual

All wiring must be in accordance with national and local electrical
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a

qualified electrician.

4-1. Make sure the power is still off at the breaker box.
4-2. To connect the wires, hold the bare metal leads together and place a
wire connector over them, then twist clockwise until tight. For all wire
connections use the wire connector provided.
CAUTION: Be sure no bare wire or wire strands are visible after
making connections.
Note: For dual switch wiring, skip steps 4-3 through 4-6. Continue on
next page; performing steps 4-7 through 4-11.
Single Switch Wiring:
4-3. Connect the green or bare wire (grounding) wire from the ceiling
to the green wire with yellow stripe (grounding) from the ceiling
bracket and to the green wire with yellow stripe (grounding) from
the fan.
4-4. Connect the white wire (grounded) from the ceiling to the white wire
from the fan.
4-5. Connect the black wire (ungrounded) from the ceiling to the black
wire and the blue wire from the fan.
4-6. After all connections are made, turn wire connectors upward and
push them up into the outlet box. Be sure to separate the grounded
wires from the ungrounded wires inside the outlet box.
4 • Wiring Your Ceiling Fan
Connector
9
M6001-01 • 04/16/12 • Casablanca Fan Company
Step 4-3 and 5-3
Wire
Steps 4-4 -4-5
green wire
with yellow
stripe