Assembling The Blades - Casablanca Tribeca Owner's Manual And Installation Manual

6-1 . Using the provided Allen wrench, attach each blade to the
blade iron using three barrel nuts and three decorative
screws as shown.
Note: You may place the decorative screws and barrel nuts
facing up or down.
6-2. Remove the two orange shipping rings from motor by lifting
up on the edge of the rings.
6-3. Align the five holes in the blade iron ring and the decorative
ring with the five holes in the bottom of the motor and
partially install the five blade mounting screws.
6-4. Once all five of the screws are partially installed, tighten
them securely.
Allen Wrench
Shipping
Ring
Step 6-2
6 • Assembling the Blades
Blade Iron
Ring
Decorative
Ring
Blade
Mounting
Screw
Steps 6-3 - 6-4
11
M6001-01 • 04/16/12 • Casablanca Fan Company
Blade Iron Barrel Nut
Step 6-1
Decorative
Screw