Blade Installation - Casablanca BAROLO Owner's Manual

BLADE HARDWARE (not to scale)
Blades (5)
Attach Blade Irons
Step 8. Using Screw Pack C and the provided screwdriver,
attach the blades to the blade holders by aligning the
screwholes of the blade iron with the holes in the blade.
Attach the blade iron using the four blade screws provided
for each blade as shown. Tighten securely by hand only.

Blade Installation

Step 9. Using Screw Pack D and the provided screwdriver,
attach the blade assembly to the motor as shown. Tighten
screws by hand only.
TIP: For balancing purposes, loosely install all five blades
to the motor before tightening the blade screws securely.
CAUTION:
Blade screws must be tightened securely before
operating the fan.
Attach Switch Housing Cap
Step 10. Using Screw Pack E and the provided screwdriver,
attach the switch housing cap to the bottom of the fan as
shown. Tighten securely by hand only.
8
BLADE INSTALLATION
Blade Screws and
Washers (21)
Blade Irons (5)
Pack C:
Pack D:
Blade Iron Screws (11)
Pack E:
Switch Housing Cap
Screws (2)