Raid Enable In Bios; Select A Raid Array For Use - Foxconn Destroyer User Manual

5-2 RAID enable in bIos

1. Enter the BIOS setup by pressing [DEL] key when boot up.
2. Select the "Integrated Peripherals" from the "Main menu", then select the
SATA Mode" menu and press [Enter] to go to the configuration items.
3. Enable RAID function and individual SATA port for hard drive or DVD connection.
4. Press [F10] to save the setting then PC will reboot itself.
SATA Operation Mode
SATA Pri-Master
SATA Pri-Slave
SATA Sec-Master RAID
SATA Sec-Slave
SATA Thr-Master RAID
SATA Thr-Slave
↑↓→←:Move Enter:Select

5-3 select a RAID Array for Use

When BIOS is restarted, it will display a message asking you to press [F10] key to
enter the main menu of MediaShield BIOS. Press [F10], the screen appears.
At the bottom of each screen displayed, there is one line listing each key's function,
such as [Tab], [Enter], [ESC]...etc. It is helpful to make your choice easier.
RAID Mode: Mirrored
Free Disks
Port Disk Model
0.0 WDC WD1200JD-9 111.79GB
0.0 WDC WD1200JD-9 111.79GB
0.2 Hitachi HDT725
0.1 HDS728080PLA38 76.69GB
0.3 ST3320620AS
[ESC] Quit
Phoenix - AwardBIOS CMOS Setup Utility
MCP SATA Mode
[RAID]
RAID
RAID [Enabled]
RAID [Enabled]
[Enabled]
RAID [Enabled]
[Enabled]
RAID [Enabled]
+/-/PU/PD:Value F10:Save
F5:Previous Values
MediaShield BIOS Mar 31 2008
- Define a New Array -
Mirrored
Capacity
232.88GB
[+] Add
298.09GB
[-] Del
[F6] Back [F7] Finish [TAB] Navigate
74
Item Help
Menu Level ►
ESC:Exit F1:General Help
F7:Optimized Defaults
Optimal
Stripe Block: Optimal
Array Disks
Port Disk Model Capacity
[↑↓] Select [Enter] Popup
"MCP