Pc Health Status - Foxconn Destroyer User Manual

PC Health Status

Case Open Warning
Shutdown Temperature
CPU Vcore
+ 5V
+ 3.3V
+12V
DDR2(V)
5VSB(V)
Voltage of Battery
CPU Temperature
System Temperature
CPU Fan Speed
System Fan 1 Speed
System Fan 2 Speed
Fan 1 Speed
Fan 2 Speed
CPU Smart Fan Control
x Start PWM Temperature
↑↓→←:Move Enter:Select
► Case Open Warning
This item is used to enalbe or disable case open warning function.
► Shutdown Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds the
set value, the system will shut down automatically.
► CPU Vcore/+5V/+ 3.3V/+12V/DDR2(V)/5VSB(V)/Voltage of Battery
The current voltages are automatically detected and displayed by the system.
► CPU/System Temperature
The CPU/System temperature are automatically detected and displayed by the system.
► CPU Fan/System Fan 1/System Fan 2/Fan 1/Fan 2 Speed
The fan speed are automatically detected and displayed by the system.
► CPU Smart Fan Control
This option is used to enable or disable CPU smart fan function. Only when this option is enabled,
you can set some correlative parameters.
► Start PWM Temperature
It allows you set a temperature value from which smart fan starts its operation.
► Start PWM Value
It allows you to set an initial PWM value to drive the fan when the temperature reaches Start
PWM value and smart fan begins its operation. The higher PWM value can achieve the faster
fan speed.
► Slope PWM Value
When temperature changes one degree celsius, the PWM will be increased or decreased by a
step value accordingly.
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
[Disabled]
Disabled
[Disabled]
1.36V
5.08V
3.23V
12.37V
1.80V
5.14V
3.05V
0
38 C
0
32 C
4272RPM
5818RPM
3821RPM
4096RPM
2312RPM
[Disabled]
40
+/-/PU/PD:Value F10:Save
F5:Previous Values
38
Item Help
Menu Level ►
ESC:Exit F1:General Help
F7:Optimized Defaults