5-2 RAID enable in bIoS
1. Enter the BIOS setup by pressing <DEL> key when boot up.
2. Select the "Integrated Peripherals" from the "Main menu", then select the
Configuration" menu and press <Enter> to go to the configuration items.
3. Enable RAID function and individual SATA port for hard drive or DVD connection.
4. Press <F10> to save the setting then PC will reboot itself.
IDE Configuration
OnBoard PCI IDE Controller
OnChip SATA Channel
OnChip SATA Type
SATA IDE Combined
5-3 Select a RAID Array for Use
When BIOS is restarted, it will display a message asking you to press [Ctrl-F] key to
enter the main menu of Option ROM Utility. Press [Ctrl-F], the Main Menu appears.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
Press 1..4 to Select Option
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
↑↓←→:Move Enter:Select
F1:General Help
View Drive Assignment. . . . . . . [ 1 ]
Define LD . . . . . . . . . . . . . . . . . [ 2 ]
Delete LD . . . . . . . . . . . . . . . . . [ 3 ]
Controller Configuration . . . . . . [ 4 ]
IDE Configuration
[Enabled]
[Enabled]
I
[RAID]
Native IDE
[RAID]
[Enabled]
RAID
AHCI
Legacy IDE
+/-/:Value
F10:Save
F9:Optimized Defaults
[ Main Menu ]
[ Keys Available ]
75
"SATA
Help Item
Options
ESC:Exit
[ESC] Exit